Shanghai Sunland Industrial Co., Ltd is the top manufacturer of Personal Protect Equipment in China, with 20 years’experience. We are the Chinese government appointed manufacturer for government power,personal protection equipment , medical instruments,construction industry, etc. All the products get the CE, ANSI and related Industry Certificates. All our safety helmets use the top-quality raw material without any recycling material.
Standard eye protection
We provide exclusive customization of the products logo, using advanced printing technology and technology, not suitable for fading, solid and firm, scratch-proof and anti-smashing, and suitable for various scenes such as construction, mining, warehouse, inspection, etc. Our goal is to satisfy your needs. Demand, do your best.
Professional team work and production line which can make nice quality in short time.
The professional team provides 24 * 7 after-sales service for you, which can help you solve any problems
The employer ,shall, ensure that employees do ,not, enter lunchroom facilities with ,protective, work ,clothing, or equipment unless surface asbestos fibers have been removed from the ,clothing, or equipment by vacuuming or other method that removes dust without causing the asbestos to become airborne.
Xinhao is an national ,medical, protection system industry technology enterprises and has obtained a number of new technology products certificate. The main products are: civilian KN95 mask , ,medical, KN95 mask, N95 mask ,disposable ,medical, mask, disposable surgical mask, ,medical protective clothing,, ,medical protective, face mask ,,medical protective, eye mask, and infrared forehead thermometer.
3) respiratory resistance: under the filter efficiency flow condition, the inspiratory resistance ,shall not exceed, 49Pa, and the expiratory resistance ,shall not exceed, 29.4pa. When the pressure difference between the two sides of the mask is P of 49Pa/cm, the gas velocity should be ≥264mm/s.
26/2/2020, · The filtration efficiency of ,protective, gown on non-oily particles should ,not, be less than 70%. Antistatic property. Charge ,shall, be no more than 0.6c/piece. 9 electrostatic attenuation performance. The decay time ,shall not exceed, 0.5s. 10 sterile. 10.1 products are sterilized with ethylene oxide and ,shall, …
For ,protective clothing, to pass standard tests, it must meet or ,exceed, minimum requirements of materials’ physical and chemical properties. Once test results are confirmed, it is qualified to carry standard pictogram and need to be correctly identified or labeled on marketing materials.
B) The moisture permeability of the material ,shall, be no less than 2500g/(m·d). 2. The anti-synthetic blood penetration of ,protective clothing, should be no less than 1.75kPa. 3. The water level on the outside side should ,not, be lower than level 3. 4. Elongation at break: The elongation at break of the key parts should be no less than 15%. 5.
The requirements for ,protective clothing, for use in the welding and allied processes are described in EN ISO 11611. The standard only focusses on ,protective clothing, (hoods, aprons, sleeves and gaiters) and does ,not, cover requirements for feet, hand, face or eye protection used for welding. The ,protective clothing, has to protect the welder against:
According to the definition of the national standard GB 19082-2009 technical requirements for single-use ,protective clothing, for ,medical, use, ,medical protective clothing, is a professional ,clothing, for ,medical, personnel who contacts potentially infectious patients' blood, body fluids, secretions, particles in the air, etc. to provide barrier and protection.